Cohesive Crack Analysis of Toughness Increase Due to Confining Pressure     

Kazushi Sato  Toshiyuki Hashida 《Pure and Applied Geophysics》2006,163(5-6):1059-1072

Apparent fracture toughness in Mode I of microcracking materials such as rocks under confining pressure is analyzed based on a cohesive crack model. In rocks, the apparent fracture toughness for crack propagation varies with the confining pressure. This study provides analytical solutions for the apparent fracture toughness using a cohesive crack model, which is a model for the fracture process zone. The problem analyzed in this study is a fluid-driven fracture of a two-dimensional crack with a cohesive zone under confining pressure. The size of the cohesive zone is assumed to be negligibly small in comparison to the crack length. The analyses are performed for two types of cohesive stress distribution, namely the constant cohesive stress (Dugdale model) and the linearly decreasing cohesive stress. Furthermore, the problem for a more general cohesive stress distribution is analyzed based on the fracture energy concept. The analytical solutions are confirmed by comparing them with the results of numerical computations performed using the body force method. The analytical solution suggests a substantial increase in the apparent fracture toughness due to increased confining pressures, even if the size of the fracture process zone is small.  相似文献   

Differences Between Mode I and Mode II Crack Propagation     

K. B. Broberg 《Pure and Applied Geophysics》2006,163(9):1867-1879

Although mode I and mode II crack propagation show many similarities, in particular when analysed by linear elastic fracture mechanics, they differ significantly in the micro-structural behaviour. These differences, which are clearly noticeable in the fracture surface morphology, lead to fundamental differences in the macroscopic behaviour. Thus, mode II crack expansion under remote loading, appears to obey micro-structural scaling laws, implying that the dimensions of the process region stay essentially constant during crack expansion, rather than increasing with crack length. Therefore, expanding mode II cracks can almost reach the Rayleigh velocity, and actually also intersonic velocities. An expanding mode I crack, on the other hand, seems to obey continuum scaling laws, implying that the dimensions of the process region increase in proportion to crack length, leading to self-similar crack expansion at a velocity significantly below the Rayleigh speed and dependent on the remote load.  相似文献   

Fault plane orientations of small earthquakes of the 1997 Umbria-Marche (Italy) seismic sequence from P-wave polarities and rise times     

Marilena Filippucci  Salvatore de Lorenzo  Enzo Boschi 《Geophysical Journal International》2006,166(1):322-338

  相似文献   

On the origin of rock fragment mulches on Vertisols: A case study from the Ethiopian highlands   总被引：1，自引：2，他引：1  

Jan Moeyersons  Jan Nyssen  Jean Poesen  Jozef Deckers  Mitiku Haile 《Geomorphology》2006,76(3-4):411-429

Many Vertisols in Tigray, Ethiopia, typically carry a discontinuous rock fragment (RF, size 0.5–> 40 · 10^− 2 m) cover with 10 to 100 RFs m^− 2. Such RF mulches are of agricultural and environmental significance because they influence the water balance in the underlying soils and the crop yield. Natural RF concentrations are mostly considered as eolian or hydraulic lag deposits, or as the result of lateral transport over the soil surface from a rock outcrop, upslope. In cultivated areas RF mulches can develop by tillage.This paper presents the case of a natural RF mulch whose lithology indicates that the RFs are up-squeezed by the local Vertisol. The study site is located in the pass of Enda Maryam, Tigray, Northern Ethiopia (39°8′ E and 13°36′ N). A circular area of 10 m diameter, about 200 m away from the water divide in the valley has been cleared annually between 01/1999 and 05/2003. During this period, 625 RFs, 17 being > 7.5 · 10^− 2 m in size, totalling a mass of nearly 62 kg, have been collected. After correction for measurement procedures, the rate of RF up-warping by the Vertisol at Enda Maryam is assessed at 5 RFs m^− 2 in 3 years. At this rate of appearance, the formation of current RF concentrations on top of active valley Vertisols is only a matter of 10^1–2 years, provided the availability of RFs below the soil surface.Although important underground displacements were measured in the Vertisol between 01/1999 and 05/2002, the supposed link between up-squeezing of RFs and plastic deformations of ‘chimney’, ‘diapir’ or ‘intrusion’-like type in the Vertisol could not be evidenced. Instead, RFs are clearly concentrated on the soil surface as well as in depth, along the existing vertical desiccation cracks, often > 1 m deep which display polygonal configurations at the soil surface. Further, bundles of slickensides containing some RFs, have been mapped at the base of the Vertisol. The slickenside configuration suggests that the RF-bearing substrate is being scraped off.While the underground displacement of RFs along active slickensides seems normal, the process of RFs ascending in ‘upright’ position in the edge of desiccation cracks needs explanation. The closure of a desiccation crack is a peristaltic-like movement, following ascent or descent of the capillary fringe. It is hypothesized that this movement gradually pushes the RF to the surface or to another place or level in the soil profile where the crack closes in last instance.The apparent young age of the valley Vertisol mulches in Ethiopia might indicate the very recent formation of yearly recurrent desiccation cracks of Vertisols in the area. Available information confirms that most valleys in the study area used to be perennially marshy. Under these conditions no movements of RFs in the soil profile are expected to occur. Gullying, leading to pronounced seasonal desiccation of the Vertisols, started in several cases not more than 50 years ago.  相似文献   

浅析房产面积测算的工作程序和技术要领     

李孟健  于秀芸 《现代测绘》2007,30(1):27-28

房产面积测量环节多、要求高、政策性强。如何正确地理解《规范》的原则,细化成具有可操作性的工作细则,形成连贯、协调的程序,提高工作效率,保证测绘质量,完善房产管理,是测绘学科中的一项重要课题。本文在这方面进行了一些探讨和总结。  相似文献   

岩浆驱动破裂的形态研究     

栾锡武  秦蕴珊  宋海斌  石耀霖 《地球物理学进展》2003,18(1):138-141

轴地壳岩浆房是活动扩张中心海洋地壳结构的一个重要组成部分，轴地壳岩浆房通过深部岩浆源的补充，内部岩浆的同化熔融、结晶分异等岩浆房过程，其中的岩浆会破裂上覆的岩石层形成岩浆破裂，并沿岩浆破裂继续向上迁移。本文建立了岩浆迁移的层流模型，从理论上对岩浆迁移问题进行了探讨，并将遗传算法引入到该问题中来，用遗传算法求解了描述岩浆驱动破裂传播的积分方程。如果假设岩浆破裂在远离破裂末梢处的权限宽度为1M，则靠近末梢，破裂的宽度逐渐加大，在末梢处宽度为2m左右。并根据文献对岩浆流体的一些观测参数计算得出，岩浆破裂权限宽度不会很大，一般在1m左右的量级。  相似文献   

含裂隙煤层底板突水规律的数值模拟与工程应用   总被引：5，自引：0，他引：5  

吕春峰  王芝银  李云鹏 《岩土力学》2003,(Z2)

本文结合淮北杨庄矿某工作面实际工程情况, 利用NCAP-2D-W对煤层底板突水进行多方案的数值模拟试验研究。主要内容包括:(1) 考虑在承压水不变的条件下,设计不同裂隙分布状态,探讨单裂隙、多裂隙、不同长度裂隙对煤层底板破坏的影响及开采矿压对裂隙顶部破坏的影响;(2) 考虑承压水的变化,分别考虑单裂隙和多裂隙两种分布状态,探讨裂隙对煤层底板破坏的影响及开采矿压对裂隙底部破坏的影响。通过分析受采动荷载、岩层结构变化、煤层底板中裂隙分布状态及承压水变化等因素影响的数值试验,获得了随开采工作面不断推进煤层底板破坏区的发展、突水导升高度的递增、突水通道的形成等相关规律。  相似文献   

Electromagnetic Radiation from Rock During Uniaxial Compression Testing: The Effects of Rock Characteristics and Test Conditions   总被引：3，自引：0，他引：3  

K. Fukui  S. Okubo  T. Terashima 《Rock Mechanics and Rock Engineering》2005,38(5):411-423

  相似文献   

国道108线广元段公路桥梁裂缝病害及加固对策     

魏云杰  孙跃胜  许模 《中国地质灾害与防治学报》2005,16(2):129-131,153

国道108线广元段由于地质地貌条件复杂、重载作用及施工质量未能保证，桥梁裂缝病害较为普遍。文章简要介绍了沿线工程地质条件，按裂缝病害的成因将其分为3种类型：即桥台填土上部不密实引起的裂缝病害、桥台填土整体不密实引起的裂缝病害及地基土不均匀引起的裂缝病害。分别提出3种加固对策：即压浆、预应力对穿锚索锚梁及高压旋喷技术对上述病害进行治理。通过工程实例证明了这3种措施的有效性，为公路桥梁类似裂缝灾害提供了实践经验。这3种治理措施的优点为工艺简单、成本较低。但是桥梁病害的治理往往为隐蔽工程，施工难度较大、检测困难。对于压浆和高压旋喷加固工程，必须进行取芯检测，而预应力对穿锚索锚梁在施工过程中必须严格控制水平孔的倾斜度，保证施工质量。  相似文献   

肇源松花江特大桥暖棚法养护主墩混凝土施工的应用     

邹德明  王志文  姜宝峰 《吉林地质》2004,23(4):97-100

混凝土冬季暖棚加热法是一个古老工艺，存在生产方式落后，生产效率低下，环境污染严重，生产成本高昂的弱点。但本文所述方法，恰恰是在古老工艺思维的基础上，充分发挥了现代自动燃油加温设备的优势．通过输送蒸汽、吹热风，使暖棚满足混凝土拌和、浇筑和养护的温度，保证了质量要求，实现混凝土冬季施工．为提前工期创造了条件。  相似文献